How to Resolve Whirlpool Washing Machine Door Locked Flashing Issue

Technically Reviewed by Dmytro Shcherbyna, Chief Technical Officer, on Jun 08, 2024 | Written by Excellence Appliance Repair, Editorial Contributors

Is your Whirlpool washing machine door locked light flashing and nothing else is working? This common issue can be frustrating, especially when you have a load of laundry waiting to be washed. Don't worry, though—there are a few straightforward steps you can take to resolve this problem. Follow this guide to get your washer back in working order, or reach out to Excellence Appliance Repair for expert assistance.

Quick Takeaways

If your Whirlpool washing machine's door locked light is flashing, it could be due to a delay in water filling, a glitch in the electronics, or a need for a manual latch reset. Unplugging the washer for a short period often resolves the issue.

Potential Causes of the Problem

There are several reasons why your Whirlpool washing machine door locked light might be flashing:

• Water Fill Delay: The washer may take too long to fill with water, triggering a safety lock to prevent flooding.
• Electronic Glitch: A minor glitch in the washer's electronics can cause the door lock light to flash.
• Mechanical Issue: The door latch mechanism might be faulty or require a manual reset.

Step-by-Step Guide to Fix the Issue

Step 1: Unplug the Washer

The first and simplest step is to unplug the washer. Leave it unplugged for about 60 seconds. This often resets the electronics and resolves the flashing lock light issue.

Step 2: Wait and Replug

If unplugging the washer for 60 seconds doesn't work, try this: plug the washer back in and leave it for about 20 minutes. This gives the machine time to complete any unfinished cycles and unlock the door.

Step 3: Manual Latch Reset

If the door remains locked, you may need to manually reset the latch:

1. Unplug the washer again for safety.
2. Locate and remove the screws at the back of the top panel.
3. Slide the top panel back and lift it off to access the internal components.
4. Reach down to the bottom of the door latch where there is a 1-inch round plastic tab.
5. Pull on this tab to manually unlock the door.

After performing this manual reset, plug the washer back in. The latch should reset, and the door lock light should stop flashing.

Step 4: Replace the Door Latch

If none of the above steps work, the door latch itself may need to be replaced. This task can be more complex and might require professional assistance.

Call a Professional for Help

If you're unable to resolve the flashing lock light issue on your own, it's time to call in the experts. At Excellence Appliance Repair, our skilled technicians are experienced with Whirlpool washing machines and can fix appliances of any brand. We offer same-day service, use only original spare parts, and provide a three-month warranty on all repairs. Don't let a small glitch ruin your day—contact us for fast, reliable, and affordable appliance repair services.

Reach out to Excellence Appliance Repair today and let us help you get your Whirlpool washing machine back in perfect working condition.